|
There are currently no product reviews.
 ;
Good service manual,i saved from scrapping this deck,is now fully functional.Thanks.
 ;
Found this to be the manual included with the original packinging, was helpfull but did not give any detailed repair instructions.
 ;
Complete service manual, was very helpful in repairing this tapedeck.Thanks.
 ;
The service manual was a copy of the original from Wirlpool. The quality was good, all neccecary information was available including the service-codenumbers, so I could order the right part to be replaced for repair.
Downloding was no probem after the payment.
Thanks for the service!
 ;
Good,readable manual. I found other manuals that were not readable when it came to part ID, but the one downloaded from owner-manual.com was better than expected. I will do buisness with owner-manual.com again.
5
6
7
8
� INPUT 2 (DVI)
A
Are approx. 500 mVp-p signals input to Pins 80 and 90 of IC7001? Waveform 28 Yes Is the voltage at Pin 3 of IC7003 3.3 V DC? Yes
No
Check the signal output equipment and its cables.
No
Is the voltage at Pin 1 of IC7003 5 V DC? No Is the voltage at Pin 1 of IC7006 7 V DC? No Failure in the DD Assy
Yes
Failure in the IC7003
B
Yes Failure in the IC7006
Are sync signals input to Pins 48 and 47 of IC7001? And is a CLK signal input to Pin 44 of IC7001? Waveform 29
No
Failure in the MAIN Assy
C
Yes Are sync signals input to Pins 7 and 9 of IC5603? Waveform 30 Yes Are sync signals input to Pins 11 and 13 of IC5605? Waveform 31 Yes
No
Failure in the IC5603
No
Failure in the IC5605
D
Are sync signals input to Pins 3 and 6 of IC5606? Waveform 32 Yes Failure in the MAIN Assy No Failure in the IC5606
E
F
PDP-507CMX
5 6 7 8
105
|