|
There are currently no product reviews.
 ;
OK?..manual is complet and helpfull... for repairing such a old and rare boombox like JVC PCM it is necessary...
;
Super Anleitung. Ordentliche Auflösung. Das ganze noch in Deutsch wäre zu schön. Alle Datenblätter sind sauber Kopiert und alle Leitungswege sind sauber ausgeführt
;
Thanks God for the internet and thanks for the service like this - proffessional solution on time.
;
About the service it's very fast and reliable. About the manual the quality is high enough to read even the tiniest details on the wiring diagrams so you can't ask much more than that, let it alone for a manual of a product from 20 years ago. Thank you, very satisfied.
;
The downloaded quality was as good as the orignial
5
6
7
8
� INPUT 2 (DVI)
A
Are approx. 500 mVp-p signals input to Pins 80 and 90 of IC7001? Waveform 28 Yes Is the voltage at Pin 3 of IC7003 3.3 V DC? Yes
No
Check the signal output equipment and its cables.
No
Is the voltage at Pin 1 of IC7003 5 V DC? No Is the voltage at Pin 1 of IC7006 7 V DC? No Failure in the DD Assy
Yes
Failure in the IC7003
B
Yes Failure in the IC7006
Are sync signals input to Pins 48 and 47 of IC7001? And is a CLK signal input to Pin 44 of IC7001? Waveform 29
No
Failure in the MAIN Assy
C
Yes Are sync signals input to Pins 7 and 9 of IC5603? Waveform 30 Yes Are sync signals input to Pins 11 and 13 of IC5605? Waveform 31 Yes
No
Failure in the IC5603
No
Failure in the IC5605
D
Are sync signals input to Pins 3 and 6 of IC5606? Waveform 32 Yes Failure in the MAIN Assy No Failure in the IC5606
E
F
PDP-507CMX
5 6 7 8
105
|
