|
|
|
Who's Online
There currently are 5923 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I needed the manual immediately and I got it immediately. I couldn't find this manual anywhere else on the net. The site was easy to traverse, and the price was very reasonable. I'll definitely be back for any future needs.
 ;
I received a good service manual, with good resolution. Improve the instructions for the purchase because they are not well understood.
For the rest, so good.
Thanks Angel.
;
Very good documentation for the Grundig 2077 model (as well as similar 800/900/1000 series radios). The first two pages are a summary of reception specifications and output capability. The third page is the tuner dial indicator and dial cord routing diagram. the final ~5 pages are the schematics for the various models (including 2077). The scan quality of the schematics are good, adn can be easily read if zoomed in. The documents are in German, not English as stated. It would have been nice to have the tuning sequence and settings, and some trouble shooting materials... or component and wiring map.
;
Perfect like it was descriped, Perfect like it was descriped
;
Very good detail, all pages clear, exactly what I needed
1
2
3
4
No sound from the speakers (2/2)
A
A
No sound from the sub-woofer No
Is it sound for every function that doesn't come out? No
Is sound muting set? No
Yes
Cancel muting then check again.
Is a signal output from IC8002?
B
Yes
B
Check around IC8002 and No check the communications between IC8002 and the microcomputer.
Is the volume set to 0? No Are the headphones connected? No Is a signal output from IC8003? (3), (13)
Yes
Raise the volume then check again.
Yes
Has the signal arrived at TP8668 and TP8667?
No Check around IC8003 and check the buffer circuits.
Disconnect the headphones then check again.
45 46
Yes Has the signal arrived at TP9301 and TP9303?
B
Check the flexible cables No between the AV BOARD Assy and MR MAIN BOARD Assy
No Check around IC8003 and
34 35
Yes
B
No
check each input signal.
47 48
Yes Has the symptom been settled when the system cable is replaced? Yes
B
No
and between the MR MAIN BOARD Assy and MDR Assy.
Is a signal output from IC8008? (7), (10) Yes
36 37
B
No
Check around IC8008.
C
The panel is defective.
Is a signal output from IC8007? (1), (7)
Check around IC8007.
38 39
Yes
B
No
Finishing troubleshooting
Has the signal arrived at TP7710?
Check around Q7761.
49
Yes
B
Check around the jack.
D
E
F
134
1 2
PDP-R04E
3 4
|
|
|
> |
|
