|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Yes thank you i got the file i was after. There was a slight problem in my communication but it all worked out well.
A job well done.
 ;
Great manual...really saved me. The only problem is that I thought I would be able to download it directly when I paid for it but never received the download instructions until the next morning. The board trace pages were somewhat light also: really need to turn up the contrast on the printer before printing them. The schematic page was great; very clear! Well worth the money.
;
I've been in the electronic business for a long time. I used to buy Sam's Photofact for my needs which intailed having to go to the store and paying about $20 for a package of 3 different units so I was forced to buy more than I needed just to get one.
Owner manual is just at your keyboard and the information is almost instantansouly and the cost is very reasonable. Easy to print out if needed or simply read off of the screen. The larger the screen the better for obvious reasons.
;
Very good manual, at a very good price. Received in a timely manner
;
Only thу cover has poor quality, internal material has excellent quality - exactly what I needed
Thanks!
5
6
7
8
No sound from the speakers (2/2)
A
A
No sound from the sub-woofer No
Is it sound for every function that doesn't come out? No
Is sound muting set? No
Yes
Cancel muting then check again.
Is a signal output from IC8002?
B
Yes Has the signal arrived at TP8668 and TP8667?
Check around IC8002 and No check the communications between IC8002 and the microcomputer.
Is the volume set to 0? No Are the headphones connected? No Is a signal output from IC8003? (3), (13) 34 35
Yes
Raise the volume then check again.
Yes
No Check around IC8003 and check the buffer circuits.
Disconnect the headphones then check again.
B
45 46
Yes Has the signal arrived at TP9301 and TP9303?
B
Check the flexible cables No between the AV BOARD Assy and MR MAIN BOARD Assy and between the MR MAIN BOARD Assy and MDR Assy.
B
No Check around IC8003 and check each input signal.
Yes Is a signal output from IC8008? (7), (10) No Check around IC8008.
C
47 48
Yes Has the symptom been settled when the system cable is replaced? Yes
B
36 37
Yes
B
No The panel is defective.
Is a signal output from IC8007? (1), (7)
No
Check around IC8007.
38 39
Yes
B
No
Finishing troubleshooting
Has the signal arrived at TP7710?
Check around Q7761.
49
Yes
B
D
Check around the jack.
E
F
PDP-R05E
5 6 7 8
169
|
|
|
> |
|
