|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I love older radio's and the service manuals that are sometimes hard to find. Was able to find a manual quite easily on this site.
;
Thank you for your shop manual! Your help was very useful - the device is repaired! Once again - Thank you! I wish you a successful business! Edward (Russia).
;
It was a great experience,instead of purchasing a new Stereo Amplifier ,in just minutes i repaired my old one and that was thaks to the manual I have purchased from you.
Thanks again.
Samuel Alter
;
Das ging ja sehr unkompliziert hat bestens geklappt und die Quallität ist auch noch gut.
Vielen Dank dafür.
;
Everything okay, thanks a lot. It was a pleasure for me to make a deal with you.
4. CDS Gain Adjustment 1) Purpose Adjust the CCD sensitivity. Adjust 3 gains, namely, Normal mode gain, 2x sensitivity gain and 4x sensitivity gain. 2) Setting � Warm up the brightness box. Refer to the instruction manual for the brightness box to be used. � Set the brightness of the brightness box to the value designated by the message box. Ensure the correct brightness by using a luminance meter. � Set the camera in front of the brightness box. � Shut off ambient light. 3) Adjustment Procedures a) Select �CDS Gain Adj.� from the menu screen. The following message is displayed.
5. Pixel Defect Detection 1) Purpose Create a map of CCD pixel defects. 2) Setting Warm up the brightness box. Refer to the instruction manual for the brightness box to be used. � Set the brightness of the brightness box to the value designated by the message box. Ensure the correct brightness by using a luminance meter. � Set the camera in front of the brightness box. � Shut off ambient light. 3) Adjustment Procedures a) Select �Pix Adj.� from the menu screen. The following message is displayed.
Fig. 3-13 Fig. 3-12 b) Click the �Run� button. c) The setting message of the brightness box is displayed. Confirm the brightness then click the �OK� button. (The adjustment is not performed when the �Cancel� button is clicked upon the brightness setting message.) d) Click the �Write� button to write the adjustment data when �¡� is displayed on the judgment box �JUDGE� of the adjustment result b) Select a radio box of �Bright�, then click the �Run� button. c) The set message of the brightness box is displayed. Confirm the brightness, and the adjustment value is automatically written by clicking the �OK� button. (The adjustment is not performed when the �Cancel� button is clicked upon the brightness setting message.) d) Select a radio box of �Dark�, then click the �Run� button. Note : � Do not terminate this program halfway since this adjustment requires more time in comparison with other adjustments. The message of �Timeout� is displayed when communication errors occur.
- 36 -
|
|
|
> |
|
