|
There are currently no product reviews.
 ;
Well done!!! I found what I need to have, indeed!
Furthermore, due to my hobby is repairing vintage equipments, I added this web site in my desk toolbar because I have in mind to search further service manuals. Thanks a lot www.owner-manuals.com !
Regards, Maurizio
;
Again very good service manual, this time very fast download. AAAAA+
;
Ckear manual, well reproduced with plenty of overlap on critical pages.
;
I buy the service manual cheaper here than in elsewhere.Am happy with this site. I recommended the Owner-Manuals.com
;
Great Manual. It was exactly what I was looking for
PDR-F10
Cautions:
(1) All the reading values of power meter of this adjustment are values with an average. (2) How to confirm the adjustment value: When enter the power adjustment mode, enter it by pressing the SIDE A and FRM/TIM keys in order. Furthermore, can confirm the adjustment value of each power stored in SIDE A by switching the FRM/TIM key. However, RW cannot see all adjustment results. Use DAC the same as erase power in the Bias Power Adjustment, and perform the adjustment of record power while outputting the setting value of erase power decided in the Bias Power Adjustment. And perform the Erase Power Adjustment while outputting the setting value of the record power. Therefore, the value of Bias Power Adjustment does not remain after adjustment of the erase power. (as for the displayed adjustment value, erase power is the same as bias power.) It is only erase power that can confirm the adjustment result with the power meter among power of RW. As for the value of Record Power Adjustment, only setting numeric value is readable, but output power becomes the same as the erase power. Bias power cannot confirm the setting value, too. Be not used during actual record operations either.
51
|
