AEG PE8036/60-M
Owner's Manual

PROGRAMMING OF COFFEE MEASURE IN THE CUP � � The coffee measure in the cup can be as one likes. Set the coffee measuring knob (B19) on the required �coffee measure� light and grind a certain measure of coffee in the filterholder. Insert the filter-holder (A11) in the ring nut (A-1), and put under it one or two cups according to the selected program. To access the programming stage Keep the coffee button pressed (B-21) for at about 5 seconds. When the coffee starts coming out, release the button (meanwhile the �coffee measure� light will be blinking)(B27). When the required quantity is reached push the button again (B21) and it will be automatically stored in the control unit. PROGRAMMING OF WATER MEASURE � � � � Put a container under the steam pipe (A-2) Turn the steam knob counterclockwise (B-18). To access the programming stage Keep the water button pressed (B22) for at about 5 seconds. Release the button when the water starts coming out.

�

When the required quantity is reached push the hot water button again (B-22) and it will be automatically stored in the control unit.

5. ACCESSORIES
� � The coffee machine is equipped with one filter-holder (A-11) on which two filters can be inserted: 1-cup (A-12) 2- cup (A-13) By using paper pods, use only a 1-cup-filter. There is also a measure(A-14), which is useful in order to know exactly the ground coffee measure (about 7,2 g). The machine have also two nozzles, a 1-(A-15) and a 2-way nozzle (A-16), that should be alternatively screwed on the filterholder (A-11) according to what one requires.

� �

�

�

6. DRAWER (OPTIONAL)
� The machine can optionally have also a well-equipped drawer with a stainless steel front panel, type PES 8036-m. The drawer has a lot of useful compartments: A basin for coffee-grounds measure). A tray One large compartment for cups and saucers A seat for all accessories (filters,

6/23