|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I was very skeptical of this website, I have never downloaded manuals before. I put it on the AMEX and payed through Paypal to ensure protection. I got the manual exactly as described and now I can replace the filter capacitor for this amp. Great Price, others selling for 12.99 or more and this is the same manual. I will search out this website for other manuals. Thank you
;
Manual was reasonably easy to follow. I am not an engineer or know much about electronics but with the manuals help I was able to figure out the problem, identify the part required for the repair. Replacement part cost around $30. Whilst replacing the part I was telling myself, "this aint gonna work cos it seems far too easy". Took about 15 minutes to do and my plasma TV works a treat. Would never have been able to do this without the service manual.
;
It is OK, this manual help me to repair my dynacord
 ;
Good manual. Even it is an old printed manual, it is well scanned and complete, with all drawings, schematics and parts list. Very good return for the cost.
;
I'm very satisfied with my purchase. It resolved my problem. Owner-manuals.com is a very very good place.
Thank you!
5.0 TROUBLESHOOTING & SERVICE TIPS
SYMPTOM: THE INITIAL SCREEN IS NOT DISPLAYED ON THE LCD
Refer to the symptom NO POWER, NO GREEN LED
start
Check if the LED on the front lights up? yes
no
Replace broken harness
Repair connector
yes Open the top and bottom assembly to check the connector harness Is the connector harness broken? Remove the LCD cover and plate of the LCD unit to check the connector of the FL harness
no
Check if the backlight is OK?
no
no
Is the connector OK?
yes
yes
Replace FL inverter or LCD
Check if the lighting of the LCD is OK? yes
no
Open the top and bottom assembly to check the connector to the main board
Is the connector broken? yes Replace LCD harness or main board
no
Remove the LCD cover and plate of the LCD unit to check the connection of the harness to the LCD unit
Replace LCD unit or main board
Connect the LCD harness to the LCD unit
no
Is the connection OK? yes
Replace LCD unit or main board
SYMPTOM: NO IMAGE OR SOUND COMES OUT FROM THE EXTERNAL INPUT
start
Replace the main board or the connector
|
|
|
> |
|
