|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I searched the Internet exhaustively for this manual and Owner-Manuals was the least expensive...but provided an excellent reproduction within 4 hours. Very satisified.
 ;
Rapid and precise delivery. Good print. On the spot.
;
available for me the service manual is in order!
thanks
;
This is exactly the thing you need to service this box. The manual is complete and the quality of the scan is good. I recommend this!
;
The delivery of this manual was very fast, less than 8 hours. The manual is very clear and concise, and helped a great deal in the repair and final setup of the Hitachi HMA-G2 Amplifier.
1-6. Installation of the Optional Board
4. Turn the board levers in the direction of the arrow 1 after inserting the board to the end of the slot by hand.
Rear side 1. Remove the two screws and remove the blank panel corresponding to the slot which the board has been installed in the front. n Keep the blank panel which is removed.
1
2 B 3x6
2 1 2 Board lever 1 Blank panel
1
2 Board lever
1 Insert 2 Remove
2. Insert the connector panel. 3. Secure the connector panel with the two screws securing the blank panel.
5. Stick the slot label supplied with the optional board onto the board lever. 6. Install the board retainers. 7. Install the front panel. n When removing the board, turn the board levers in the direction of the arrow 2, and pull out the board toward you.
B 3x6
Connector panel
n Do not open the slot for realizing an air-colled effect of this unit. Install the blank panel to an empty slot.
PFV-D300
1-5 (E)
|
|
|
> |
|
