|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very good conversation, Pretty fast Service, wood do it again,
Have paid by Paypal, so i got the Service Manual online after 15 Min.
Very helpfully.
Greeting from Germany,
Hans
;
Good-quality scans. Detailed description. I hope I can repair the machine.
;
High-quality scanning. Detailed description. Recommend for all technician. A+++
;
This is a good quality scan of the original Service Manual from Nordmende, Germany. Contains the circuit diagram, PCB layout, adjust/tune instructions as well. It is NOT in English but in GERMAN language! That was quite right for my german friend from the lower east side in Berlin.
 ;
Received via e-mail this PDF manual is worth the money. This is a quality scan of a manual in excellent condition and is just as good as having the original manual in hand. I have later seen the original manual and it was printed in colour, but this particular manual is black & white but scan resolution is high end quality! All drawings and pictures are presented in great detail. So, nearly perfect score in my opinion.
If you own the turntable you also should own the manual!
1-6. Installation of the Optional Board
4. Turn the board levers in the direction of the arrow 1 after inserting the board to the end of the slot by hand.
Rear side n 1. Save the removed blank panel for later use. 2. Always attach the IFB shield parts attached to both sides of the blank panel, since they are the parts that use spurious radiation. 3. In order to maintain the cooling effect for the main unit, do not leave the slot open. Be sure to attach a blank panel to an empty slot. The connector panel attachment methods are divided into three types, depending on the slot number.
1
2
<Type 1> For slot No. 1 <Type 2> For slot Nos. 2 to 6, 9 to 14 <Type 3> For slot Nos. 7, 8
2 1 2 Board lever 1
The attachment methods for each type are explained below.
1
<Type 1> 1. Remove the five screws, and remove the IFB shield L, the IFB shield and the blank panel.
2 Board lever
1 Insert 2 Remove
5. Stick the slot label supplied with the optional board onto the board lever. 6. Install the board retainers. 7. Install the front panel. n When removing the board, turn the board levers in the direction of the arrow 2, and pull out the board toward you.
Blank panel IFB shield
PWH 3x6
PWH 3x6
PWH 3x6 IFB shield L
PFV-HD300 MM
1-5 (E)
|
|
|
> |
|
