|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
A very easy to understand and use manual. Well worth the money.
 ;
Very good information with clear drawings. Thanks!
;
The ease of this purchase was a good start. The content of this manual was exactly all I needed to retore my Tandberg 64.
All of the mechanical and electrical information is contained in the manual and the quality of the document makes reading the data easy.
The exerience with the resource has made this my prime source for technical data.
;
Owner-manuals.com is the best Possibility to give vantage HIGH CLASS Elektronic COMPONENTS
a new Life.Thanks alot for your perfekt Service.
;
I am proud of you. In the future, I benefited from your services.
Optical Adjustments
Condenser Lens adjustment 1 Turn the projector on by a state of without FPC cables. 2 Adjust the adjustment base of condenser lens ass�y to make color
uniformity in white. 1) If the shading appears on the left or right of the screen as shown in Fig.2-1, loosen 2 screws A with the 2.0mm hex driver, and adjust the slot B to make color uniformity in white by using a slot screwdriver. 2) If the shading appears on the top or bottom of the screen as shown in Fig.2-2, loosen 2 screws C with the 2.0mm hex driver, and adjust the slot D to make color uniformity in white by using a slot screwdriver 3 Tighten screws A and C to fix the Condenser lens unit. Note: The relay lens adjustment must be carried out after completing this adjustment. a White b
b a B A
Fig.2-1
Moving of Slot B
A
x White y
C x C y D
Fig.2-2
Moving of Slot D
-21-
|
|
|
> |
|
