|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Manual was complete and available promptly, since I had lost my original manual. Very good response.
;
Whilst this is a photo copy, and some of the pages are a little askew, it was all readable and intact. A real bonus finding an old manual for a classic piece of kit that no other site had.
Great stuff.
;
excellent quality, contains circuits and scan quality, 110 pages
;
It was easy done, and I got exactly what I was looking for.
;
The manuel was exactly what I needed and I received it promptly. Thanks
CHOOSING A POWER SUPPLY
This radio can be operated using:4 Alkaline UM-1(D size) batteries AC power (230V/50Hz)
INSTALLING BATTERIES
(1) Position the radio face down. (2) Press the catch and pull out the cover of battery compartment. (3) Insert 4 UM-1(D size)batteries. (4) Replace the battery cover.
BATTERY REPLACEMENT
The battery indicator will display the battery level for approximately 7 seconds after radio is switched on. The battery indicator will show when the battery in full power level. ,the batteries when Display battery indicator shows
should be replaced. After removing the batteries, you have approximately 3 minutes to replace the batteries after which clock and memory information will be lost.
USING THE AC LINE-IN
Before plug the AC cord into Ac socket, make sure the AC voltage is 230V AC/50Hz. The AC cord should be disconnected from the mains supply when not in use
SETTING THE CLOCK
The clock will start running when the batteries are installed or AC power is plugged in.The display will show 0:00 and real time symbol ' '.
6
|
|
|
> |
|
