INFINITY PRELUDE MTS TOWER
Service Manual

Prelude MTS Tower
EXPLODED VIEW
Top Cap 335044-001 Top Cap Gasket 335353-001 Grille retainer (12) 333249-003 Screws (16) #8-32 x ¹��" FPH BLK 901701-008 Screws (4) #¹��-20 x .5" PPH BLK 908701-008 Network (2) 335229-001

Screws (1) #10-32 x .875" PPH BLK 900401-014

Woofers (4) 335223-001

Screws (4) #4-40 x ¹��" PPH BLK 905501-008

Prelude MTS Tower (Not for Sale)

Tweeter Gasket Tweeter 335225-001 Screws (4) #8-32 x ¹��" PPH BLK 900201-008

Screws (12) #8-32 x ¹��" PPH BLK 900201-008

Screws (4) #8-18 x ¹��" FPH BLK 908801-008

Mid-Range Cup 335226-002 Front Baffle 335227-001 Mid-Range Cup Gasket Mid-Range 335705-001 335224-001 Bottom Gasket 335354-001 Baffle Plugs (2) 335352-001 Grille 335230-001 Front Baffle Gasket 335356 -001 Screws (4) #¹��-20 x .5" PPH BLK 908701-800 Network (2) 335229-001 Bottom Connector Plate 335248-001 Binding Post (Red) 335358-002 Bottom Cap* 335044-002 * Only included in the optional wall accessory WALL BRACKET�PMTS-WB Screws (3) #¹��-20 x 1.25" PPH BLK 900501-020 Binding Post (Black) 335358-001

To Service the Prelude MTS Tower: 1) Lay the loudspeaker down on a padded, level surface with the drivers facing upwards. Enclosure will have a tendency to �roll� so it must be propped; then remove the grille. 2) Extract all (12) rubber grille retainers; this can be accomplished by carefully pulling them out of their cavities with long-nosed pliers or similar tool. 3) Remove the (12) Philips screws that are now exposed. 4) Carefully lift the fully loaded baffle off the cabinet.

Infinity Systems, Inc. 250 Crossways Park Dr., Woodbury, New York 11797

Rev1 2/02

Prelude MTS Tower