The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
This manual is very helpfull to use the Power Supply. All technical information has been available.
For service use the circuit diagrams are very good.
Thanks .
Very comprehensive document which is a must-have for any Satellit 2100 owner whose set up is somewhat intricate. Due to the bad quality of the pictures that are rather dark and a bit blurred I gave 4-star feedback.
Text excerpt from page 99 (click to view)
Useful Remote Control Features
Manufacturing Reset
All learned and preset codes can be returned to the factory defaults regardless of the mode.
14
1 Press EDIT/LEARN and TV a at the same time. The Mode
switch setting is ignored. � The LED indicator flashes and the remote control unit enters the Manufacturing Reset mode.
2 Press D (yellow) to reset the remote control.
� The manufacturing reset is complete. The LED flashes for one second then the remote control unit returns to normal operation.
Note
� To exit the Edit mode before it is complete, press EDIT/LEARN again. � If the Mode switch selection is changed when in the Edit mode, the Edit session is canceled. � If no operation is performed within one minute, the Edit session is canceled. � When you enter an unlisted code, the LED flashes repeatedly. � If the tables on pages 100 to 104 do not include your device�s manufacturer or the remote control does not work, use the Learn mode. � The initial mode is �PIONEER�. � When using any of the receiver buttons (a, INPUT, or VOL +/ �) to cancel the Learn mode, follow the procedure with the Mode switch set to �TV�. You cannot cancel the mode otherwise. � You may not be able to partially or entirely control some equipment in the tables.