|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The manual was well-scanned and easy to read. As an added bonus, the Operator's Manual was bundled with the Service Manual!
I'd definitely use owner-manuals.com again.
;
Finally, i found one website, where i can download this service manual , and fix my hifi. The service manual is very good, and easy to download and to print.
 ;
Complete and very useful. Could have benefited from a little higher resolution on the schematic and layout diagrams for improved legibility.
;
Great Service Manual, Very Complete, as advertised, Perfect, Thanks!
;
Good quality service manual.It has helped me to fix my FV1800,particularly for replacing the dial cord.The scheme is on A3 format and very readable.Thank.Olivier.
PRO-700HD
¶ Vertical correction adjustment of the green line
� Select the Adjustment item
GV - SUB PIN
1
CH
� Adjust the Data value
2 5 8 0 3 6 9
VOL
or
4 7
or
In particular, be aware of the setting before adjustment.
Note : � Repeat the adjustments until you attain the optimum state. � Fine-adjust over the entire picture to obtain the optimum picture. � If the adjustment of V-STATIC is not possible within the range of 010 to �010, set the data value to 0, turn the centering magnet of the deflection yoke and fine-adjust V-STATIC. Adjustment Method
Adjustment Items 1 2 3 4 GV-KEY GV-MID KEY
� �
*2
Screen No.
�
t y o ;
� Adjust so that the green horizontal lines at the top and bottom of the screen do not tilt.
GV-SUB KEY � GV-M S KEY *2
1 2 3 4 5 6 Distortion Lean Adjustment 7 8 9 10 11 12
GV-3D KEY (GV-M 3D KEY) *2 GV-3DS KEY � (GV-M 3S KEY) *2 GV-PIN � GV-MID PIN *2 GV-4D PIN (GV-M 4D PIN) *2 GV-SUB PIN GV-M S PIN
� �
*2
� � �
u i a s d f g h j k l /
Note: Do not adjust items 2, 4, 8 and 12. � Adjust so that the green horizontal lines at the top and bottom of the screen become straight with no distortion.
�
�
�
�
GV-4DS PIN � (GV-M 4S PIN) *2
*2 : Adjust taking note of the green horizontal lines at 1/4 of the left and right sides of the screen.
7 Screen
� KEY
15
� MID KEY
16
� 3D KEY
17
� M 3D KEY
18
Key No.
¶Screen�s changes in the ver tical direction when manual convergence adjustment is mode The changes at the arrow parts shown below are those implemented using the Volume ª key. Changes are opposite to the arrow when the Volume · key is used.
4
� SUB KEY
19
� M S KEY
20
� 3DS KEY
21
� M 3S KEY
22
Key No.
3
� PIN
23
� MID PIN
24
� 4D PIN
25
� M 4D PIN
26
Key No.
6
Key No.
� SUB PIN
27
� M S PIN
28
� 4DS PIN
29
� M 4S PIN
30
5
= Fixed position Fig. 4. Vartical correction (2)
195
|
|
|
> |
|
