|
There are currently no product reviews.
 ;
Very pleased with the quality of the scan. No complaints whatsoever.
 ;
I liked the product. I would use their sevices again.
;
I Recently purchased yet another Service Manual from Owner-Manuals.com, this time for a Sony EVS700ES/UB Videocassette Recorder. The Manual was available for upload within two hours and is an Extremely Good copy, as some of this I was able to enlarge to get even better detail.
Once Again, Very happy with the result!
;
A good and useful manual. With these, We was abled to isolate and pin point the component that was causing the problem. The total time spent in troubleshooting is very much reduced.
;
The quality of the manual is top. The transfer worked perfect and fast.
No problems at all. Recommendable
5
6
7
8
8.6 PRECAUTION ON REPLACEMENT OF THE POWER SUPPLY UNIT
A
Attachment of the housing wire
The housing wire (J126) is attached to the P11 terminal of the POWER SUPPLY unit. As the housing wire is not provided with the POWER SUPPLY unit for service, when replacing the POWER SUPPLY unit, remove the housing wire (J126) from the old one and attach it to the new one. NEVER turn on the unit before replacement, as doing so may damage the PC boards or the product. Note: The wiring shown in the photo is different from the actual power supply unit, because the product in the photo is a prototype.
B
POWER SUPPLY unit
C
D
1
Disconnect the housing wire (J126) from the P11 terminal on the old POWER SUPPLY Unit. Housing wire (J126)
2
Connect the housing wire (J126) to the P11 terminal on the new POWER SUPPLY Unit. Housing wire (J126)
E
1
P11
2
P11
F
POWER SUPPLY unit (old)
POWER SUPPLY unit (new)
PDP-4280HD
5 6 7 8
137
|
