|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
1
2
3
4
A
No sound from the speakers
No sound from the speakers Yes Is sound muting set? No Is the volume set to "0"? Yes Raise the volume then check again. Is it only the FRONT input sound that doesn't come out? Yes Yes Is a signal input to IC4401? (pin 1), (pin 3) Yes Check the communications No around the FE (U4401 or U4402) and between the FE (U4401 or U4402) and the microcomputer. Check around IC4402 and No check the communications between IC4402 and the FE. Is the flexible cable between No Connect Flexible cable, CN4001 and CN7804 then check again. connected normal? Yes Is a signal input to IC4801? (pin 25), (pin 26) No Yes Cancel muting then check again.
B
No Is it the only TV sound that doesn't come out?
No
C
Is a signal input to IC4402? (pin 7) Yes
33
Is it only HDMI sound that doesn't come out? Yes
No
Is a signal output from IC4402? (pin 22), (pin 23) Yes
34
Check the communications No around the IC4402 and between the IC4402 and the microcmputer.
Is a signal output from IC6405? (pin 7), (pin 8) Yes
36
around IC6405 and No Check the communication check between IC6405 and the microcomputer.
D
Is a signal input to IC4801? (pin 19), (pin 20)
35
Yes Is a signal output from IC4801? (pin 35), (pin 36) Yes Is a signal output from CN4005? (pin 35), (pin36) Yes
No Check the communication between IC4402 and IC4801.
Is a signal input to IC4801? (pin 10), (pin 11)
37
Yes
No Check the communication between IC6405 and IC4801.
Check around IC4801 and No check the communications
38
between IC4801 and the microcomputer.
Is it the only input REAR input analog sound that doesn't come out? Yes Is a signals input to IC4801? No Check the communication between the jack and IC4801.
E
No Check the communication between CN4005 and CN1402.
38
Has the signal come to CN7201? (pin 13), (pin20) Yes Has the symptom been settled when the system cable is replaced? Yes Finishing troubleshooting No The panel is defective. No Check the communication between CN7201 and IC4801. Yes
39
F
64
1 2
PDP-R06U
3 4
|
|
|
> |
|
