The manual was made available promptly. I is a clean scan of the original. I had no problem downloading it. The scan was well centered and cleanly formatted. It is as good a product as can be had without being the original document.
Received downlink in less then 8 hours, Item was in good copy condition, and told me how to program the clock timer. The price was very resonable, and the process was very automated and was GREAT to work with.
I was very pleased with the manual I got for my amateur (ham) radio. Without it I could not figure out how to input and/or change the P/L setting on my radio. It drove me nuts as the radio was essentially useless. That all changed when my manual came. Then it took only minutes and I was done. Now my radio works fine. This is an exceptionally good resource as it's a very easy and user friendly download. Thank you very much! Dziękujemy za!
It answered my question, which was how to load the paper. I did notice that the very end of the manual was not visible.
Text excerpt from page 21 (click to view)
Something not working?
Problems which you can resolve yourself.
Problem
� The machine does not start up:
Possible cause
� Check that the door is firmly closed. � Check that the machine is plugged in and that there is power at the socket. � Check that the main fuse has not blown. � Check that the programme selector dial is positioned correctly. � Check that the ON/OFF button has been depressed.
� The machine does not fill:
� Check that the water tap is open. � Check that water is coming out of the tap. � Check that the inlet hose is not squashed or kinked. � Check that the filter in the inlet hose is not blocked. � Check that the door is closed.
� The machine fills then empties immediately: � The machine does not empty and/or does not spin:
� The end of the drain hose is too low. Refer to relevant paragraph in �water drainage� section. � Check that the drain hose is not squashed or kinked. � A programme which ends with water in tub has been selected. � The filter is clogged. Clean it. � Too much detergent or unsuitable detergent (creates too much foam) has been used. � Check whether there are any leaks from one of the inlet hose fittings. It is not always easy to see this as the water runs down the hose; check to see if it is damp. � Check that the drain hose is not damaged.
� There is water on the floor:
� The machine vibrates or is noisy:
� Check that all the transit bolts and packing have been removed. � Check that the machine is not resting against anything. � Check that the support feet are resting firmly on the ground. � Check that the laundry is evenly distributed in the drum. � Maybe there is very little laundry in the drum.
