|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Complete manual with clear schematic diagrams and printed circuit board layouts of two variants of the headset and the transmitter an old and a new version.
Also shows how the headset and the transmitter is opened and how transmitter and receivers can be adjusted and where to measure.
I had no problems to repair the headset using this service manual.
 ;
Excellent printing quality. A complete and very useful manual with all details.
;
This is a great site. I placed my order and by the next am it was available for download. Had some problems with some missing copy on some pages. Once I brought the error to the OMC's attention, the issue was resolved. I'll come back again.
;
Mi spiace per non poter scrivere in inglese... ma sono veramente soddisfatto del servizio offerto. Grazie..!!
;
The quality of this manual is good. It has all schematics and setup information for both the MDS-B3 and the MDS-B4. The scan quality is quite good, all pages are readable, This service manual also contains scans of the operating instructions from the User manual.
Alignment and Adjustments
2-2 WHITE Balance Coordinates
2-2-1 PS-50P4H White Balance Adjustment
1. W/B Adjustment is required for the following six modes : DVI ¡ Component(1080i) ¡ Component(720p) ¡ PC ¡ VIDEO (Video port) ¡ VIDEO (Graphic port) 2. Adjustment Method (Signal equipment : MSPG-925LTH, Measurement equipment : CA210) s MSPG-925LTH Equipment that outputs analog and digital signals simultaneously (Analog / Digital signal output / TV signal output (S-Video included) / HDTV signal output) -. Digital Serial : TMDS (DVI24, SiI160) + DVI-I (Analog, Digital) -. Monitor Signal (Analog): R, G, B, HS, VS, CS -. TV Signal (CVBS) : NTSC M, NTSC J (7.5 IRE On/Off) (BNC or RCA), PAL B, D, G, H, I, PAL M, Nc -. D-TV Signal (1080i, 720p, 480p) � MSPG-925 is used to adjust the W/B. s CA210 : Color Analyzers adjusting brightness, chromaticity and etc. -. R.G.B monochrome correction, brightness and gamma character adjustment -. White Balance and flickering measurement (a) DVI 1) Input Toshiba pattern (#16) at 720p resolution.
2) Select 02. Picture Improvement -> 01. White Balance. 3) Adjust items 07(Sub Contrast) & 08(Sub Brightness). 4) Adjust Items 01-03 (RGB Drives) and Items 04-06 (RGB Cutoffs). (b) Component 1) Input Toshiba Pattern (#16) at 1080i resolution. 2) Select 01. Picture Improvement > 01. White Balance. 3) Adjust White Balance by selecting and adjusting Items 01. - 08. as performed in DVI mode. 4) Change input to Toshiba Pattern (#16) at 720p resolution. 5) Adjust White Balance by selecting and adjusting Items 01. - 08. as performed in DVI mode. (c) PC 1) Input Toshiba Pattern (#16) in PC input at 1024 x 768 @ 60Hz. 2) Select 01. Picture Improvement -> 01. White Balance. 3) Adjust White Balance by selecting and adjusting Items 01 - 08 as performed in DVI mode. (d) Video The video signal uses the video port when there is no other input signal. However, signal uses the graphic port in PIP mode, which includes other input signals (PC, DVI, Component, etc.), Video adjustment should be performed with Video portand Graphic port separately.
2-2
Samsung Electronics
|
|
|
> |
|
