|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very good conversation, Pretty fast Service, wood do it again,
Have paid by Paypal, so i got the Service Manual online after 15 Min.
Very helpfully.
Greeting from Germany,
Hans
;
Good-quality scans. Detailed description. I hope I can repair the machine.
;
High-quality scanning. Detailed description. Recommend for all technician. A+++
;
This is a good quality scan of the original Service Manual from Nordmende, Germany. Contains the circuit diagram, PCB layout, adjust/tune instructions as well. It is NOT in English but in GERMAN language! That was quite right for my german friend from the lower east side in Berlin.
 ;
Received via e-mail this PDF manual is worth the money. This is a quality scan of a manual in excellent condition and is just as good as having the original manual in hand. I have later seen the original manual and it was printed in colour, but this particular manual is black & white but scan resolution is high end quality! All drawings and pictures are presented in great detail. So, nearly perfect score in my opinion.
If you own the turntable you also should own the manual!
PT-50LCZ70 / PT-56LCZ70 / PT-61LCZ70 / PT-50LCZ7 / PT-56LCZ7 / PT-61LCZ7
A
Plug in the AC Cord.
Check the voltage at the following points. Between Pin 1 and Pin 2 of CN851: approx. +120 V OK
NG
Check the parts (Ref No. 800 series) on the Power P.C.B. and replace any defective parts.
Unplug the AC Cord. Remove the jumper wire between TP810 and TP805 on the Power P.C.B. Reconnect all connector cables, then reinstall the Power P.C.B. into the unit.
Plug in the AC Cord and turn the power ON. NG OK There is no problem with the Power P.C.B.
Does the Lamp light up?
There is no problem with the Power P.C.B., however, the other P.C.B.s are defective. Check the Main P.C.B. and the Rear Jack P.C.B., and repair if necessary. Refer to "CHECKING THE OPT/TV UNIT."
Still NG Replace the Lamp Unit.
22
|
|
|
> |
|
