|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I must admit, I was very skeptical... $4.99 for a 74 page service manual. I've seen some very poorly scanned manuals on the Internet, but this one is VERY good quality! Even when zooming into 500%. Great Deal!
;
Very good detail, Quick service response. A useful service manual with all details. I recomend this service.
;
As Always you can find here manuals even of difficult TV scheme which are scan in almost perfect way.clear and fast!!!!!
Great work thanks!
;
Incredibly clear!!!! Well done, complete and wonderful. It could not better than this!!!!
 ;
Thank You for fast delivery for the sheme.
Everything allright.
Thanks & best regards Franz
PT-50LCZ70 / PT-56LCZ70 / PT-61LCZ70 / PT-50LCZ7 / PT-56LCZ7 / PT-61LCZ7
A
Plug in the AC Cord.
Check the voltage at the following points. Between Pin 1 and Pin 2 of CN851: approx. +120 V OK
NG
Check the parts (Ref No. 800 series) on the Power P.C.B. and replace any defective parts.
Unplug the AC Cord. Remove the jumper wire between TP810 and TP805 on the Power P.C.B. Reconnect all connector cables, then reinstall the Power P.C.B. into the unit.
Plug in the AC Cord and turn the power ON. NG OK There is no problem with the Power P.C.B.
Does the Lamp light up?
There is no problem with the Power P.C.B., however, the other P.C.B.s are defective. Check the Main P.C.B. and the Rear Jack P.C.B., and repair if necessary. Refer to "CHECKING THE OPT/TV UNIT."
Still NG Replace the Lamp Unit.
22
|
|
|
> |
|
