|
There are currently no product reviews.
 ;
Complete service manual in very good scanning quality with all schematic and PWB graphics as well as assembly & maintenance instructions. A slight drawback is that the rastering of the PWB graphics sometimes makes it a bit difficult to follow fine traces, but no showstopper.
 ;
Purchased the manual that I was looking for at a great price and could download it easily.. Great service experience and for future purchases I plan to use the site. Thank you very much
 ;
Service manual in good quality, it was very helpful to me. Perfect service, I am very satisfied.
Jochen Kelm
 ;
Exellent manual ,it was in great condition,and got all the info i expected,5 stars!!
 ;
I searched the Internet exhaustively for this manual and Owner-Manuals was the least expensive...but provided an excellent reproduction within 4 hours. Very satisified.
14. Enter to POINT �G-POINT� (for green) mode by pressing TV/ VIDEO. 15. �POINT� mode allows to move line horizontally and vertically from the perimeter of cursor making rounded lines become straight 16. In �POINT� mode, the adjustment data changes by 2 steps, See values on screen by pressing RECALL on remote 17. When the cursor is located in the outer area of the border the cursor starts to flash from one side to other, the location is for the non-visible area and the most outer side of screen (inside the ovals area, see figure); This applies to �LINE�, �POINT� & �ORIGIN.POINT� modes. 18. Begin adjustment from the center to the edge of the screen
�POINT� & �ORIG. POINT� mode adjustment
19. Adjust to make lines as much straight as possible 20. When slightly adjustment is needed, use �ORIG. POINT� mode. 21. To enter to �G-ORIG. POINT� (for green) mode press TV/VIDEO. 22. With �ORIG. POINT�, the adjustment data changes by 1 step, this allows more detail in the adjustment. Display values on screen by pressing RECALL on remote 23. Confirm that green adjustment is good enough, if adjustment is not satisfactory, repeat adjustments. 24. Enter to LINE �G-LINE� mode by pressing TV/VIDEO. 25. LINE mode allows to move each single line horizontally and vertically (see figure)
75
|