|
There are currently no product reviews.
 ;
It has all the information you will need to fix it. The main circuit diagram is only A4 but being a PDF, you can print it to any size - I did it on two sheets of A3 and it didnt lose any detail - just made it readable when pinned up above the bench. I've found the fault, just need to buy some obscure bits to get it going again!
I cant fault the process, I paid for the manual in the morning and it was ready to download by lunch time.
 ;
Very good copy in a 54 pages PDF archive. This is my sixth purchase here. :)
;
Another excellent buy! File too clear and explanatory.
;
A manual hard to find. It was very helpful to restore my device.
;
I am very grateful for this manual. Without it could not repair my receiver.
6. Repeat steps for green only. 7. Set VIDEO �C_OFF� DAC from 00 to 03, and project only blue. 8. Repeat steps for blue only.
16.2.1. Focus - Optical lens adjustment
Optical adjustments NOTE: This adjustment normally should not require resetting unless the lens has been replaced or adjustment has changed.
1. Optical focus adjustment is located on the top of each CRT lens system. Loosen the adjustment knurled locking knob.
Optical lens focus adjustment
2. Turn the PTV ON. Apply and view a crosshatch with dots pattern. 3. Adjust each lens focus for best focus while viewing each CRT. 4. Cover the red and blue CRT, projecting green only. Rotate the green lens for best focus around screen center area. 5. Do the same for the red focus lens while projecting red only. 6. Repeat for blue. 7. Align VM coils.
42
|
