|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Downloaded the manual, reasonably straightforward, pretty much exactly as advertised.
 ;
very helpfull
circuit diagram and sparepart list available
;
Very good reproduction (copy) of original manual. Didn't have a parts list, but schematic was completely labeled with parts. Complete instructions on how to adjust mechanical functions of the 8-track deck. Well worth having and at a very reasonable cost.
;
It's a full manual. All the parts are in there. I haven't found the problem yett, but I am working on it; hope I can rebuild the part myself. To make it more secure and unbreakable this time. Because the part has failed several times before and costs a lot to let it be repaired.
Thanks so much for this rich illustrated and parted manual.
;
I downloaded the document. The manual was complete, well scanned and everything was legible. I could zoom in see what I needed to know. There's not much more that you can ask.
PT-56DLX76-K / PT-61DLX76-K /
a. Focus Adjustment
1) Press the CH UP/DOWN key on the remote to select "DDP3021" on menu and press the ASPECT key 8 times to select "Focus pattern (SPA OFF)." 2) Confirm that each of the pixels in the center is clearly visible.
b. Verifying the Smooth Picture Gain Adjustment on the screen
1) Press the ASPECT key once from "Focus pattern" to select "Smooth picture pattern" in DDP3021. 2) Confirm that each set of R, G, B lines is straight. 3) If not, press any key to release this mode and adjust with the following procedure. (In DDP3021 mode, this adjustment cannot be performed.) 4) Press the CH UP/DOWN key on the remote to select "SP GAIN ADJUST" on Other menu and press the ASPECT key on the remote. 5) Adjust SP GAIN ADJUST so that each R, G, B line is straight by holding down the VOLUME UP/DOWN key to change the value.
<Focus pattern>
<Smooth picture pattern> straight straight straight
3) If not, loosen the Knob on the Projection Lens until the Knob can be moved.
Tighten Knob
OK NG
6) After adjusting, press the ASPECT key to return to Other menu. Note: While adjusting, do not press the RECALL key on the remote. Otherwise, the screen may be reflected or frozen. If this occurs, turn off the power and re-adjust.
Loosen
Up
Down
<Front View>
Fig. M1-5 4) Adjust the Knob by moving up or down so that each of the pixels in the center is clearly visible to obtain the best focus. 5) Tighten the Knob.
81
|
|
|
> |
|
