|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Great service! I got manual to my sony receiver for very reasonoble price.
;
Good service, well organized. Cheap, and the service manual was as expected. A valuable service for those of us wanting to keep the old junk going!
;
The manual arrived very quickly and had all the information I needed - Very satisfied with this seller. - Thanks -
;
Good quality, the manual help me to repair the echo/reverb section
;
A good service manual with lots of info and a very fair price
PT-60LCX64-K
a. Mechanical Picture Position Adjustment (Tilt)
1) Loosen the 4 Screws on the Projection Unit.
b. Focus Adjustment
1) Confirm that each of the pixels in the nine portions is clearly visible.
Projection Lens Screw Screw Screw Screw
OPT OPT HPOSI VPOSI 07 03
Twist
Twist
<Focus Screen>
2) If not, loosen the Knob on the Projection Lens until the Knob can be moved.
<Front View>
Knob
Fig. M1-5 2) Adjust the Projection Lens by twisting so that the long line "g" and the long line "h" are within 4 dots. (The long line "g" and the long line "h" will be almost aligned horizontally.)
(PT-60LCX64) CAUTION: Do not turn the screw and nut.
Tighten Loosen
Up
OPT OPT HPOSI VPOSI 07 03
Down
"G" long line "g"
<Focus Screen> long line "h"
"H"
<Front View>
Fig. M1-6 3) Adjust the Knob by moving up or down so that each of the pixels in the nine portions is clearly visible to obtain the best focus. 4) Tighten the Knob. Note: Focus Adjustment is not normally necessary. Perform this adjustment only if necessary.
"G"
within 4 dots
"H"
Note: If the Projection Lens is twisted left, the Focus Screen twists left. If the Projection Lens is twisted right, the Focus Screen twists right. 3) Tighten the 4 Screws while fixing the Projection Lens.
85
|
|
|
> |
|
