|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Complete manual as pdf-file in very good quality. Very helpful and fast availability.
 ;
Complete service manual in very good scanning quality with all schematic and PWB graphics as well as assembly & maintenance instructions. A slight drawback is that the rastering of the PWB graphics sometimes makes it a bit difficult to follow fine traces, but no showstopper.
;
Purchased the manual that I was looking for at a great price and could download it easily.. Great service experience and for future purchases I plan to use the site. Thank you very much
;
Service manual in good quality, it was very helpful to me. Perfect service, I am very satisfied.
Jochen Kelm
;
Exellent manual ,it was in great condition,and got all the info i expected,5 stars!!
PT-56DLX76-K / PT-61DLX76-K /
a. Focus Adjustment
1) Press the CH UP/DOWN key on the remote to select "DDP3021" on menu and press the ASPECT key 8 times to select "Focus pattern (SPA OFF)." 2) Confirm that each of the pixels in the center is clearly visible.
b. Verifying the Smooth Picture Gain Adjustment on the screen
1) Press the ASPECT key once from "Focus pattern" to select "Smooth picture pattern" in DDP3021. 2) Confirm that each set of R, G, B lines is straight. 3) If not, press any key to release this mode and adjust with the following procedure. (In DDP3021 mode, this adjustment cannot be performed.) 4) Press the CH UP/DOWN key on the remote to select "SP GAIN ADJUST" on Other menu and press the ASPECT key on the remote. 5) Adjust SP GAIN ADJUST so that each R, G, B line is straight by holding down the VOLUME UP/DOWN key to change the value.
<Focus pattern>
<Smooth picture pattern> straight straight straight
3) If not, loosen the Knob on the Projection Lens until the Knob can be moved.
Tighten Knob
OK NG
6) After adjusting, press the ASPECT key to return to Other menu. Note: While adjusting, do not press the RECALL key on the remote. Otherwise, the screen may be reflected or frozen. If this occurs, turn off the power and re-adjust.
Loosen
Up
Down
<Front View>
Fig. M1-5 4) Adjust the Knob by moving up or down so that each of the pixels in the center is clearly visible to obtain the best focus. 5) Tighten the Knob.
81
|
|
|
> |
|
