|
There are currently no product reviews.
 ;
I am satisfied with the service. And if need another manual, i will definitely buy from this site. Keep up the good work.
;
have download a number of manuals todate , most are excellant, one or two sometimes a little difficult to read but a least avaialable, great site .
Brad.
;
Excellent had everything I wanted, very happy with purchase
 ;
This service is relatively cheap, document is fast available, schematic is readable.
Thanks.
;
So far I´m a satisfied customer. I have only downloaded "TECHNICS SX-KN470 Service Manual" maybe I will use it later.
Best regards
Peter
PT-AE700U / PT-AE700E
6.2.
Removal of Upper Case
1. Remove the cap of the lens shift lever.
3. Unscrew the 2 screws and remove the A-P.C.Board block.
2. Unscrew the nut in the shift lever. Note: · Turn clockwise the nut to unscrew.
4. Unscrew the 7 screws and remove the connector plate.
3. Turn counterclockwise the shift lever and remove it. 4. Turn the projector upside down. 5. Unscrew the 7 screws.
6.4.
Removal of S-P.C.Board
1. Remove the upper case according to the section 6.2. "Removal of Upper Case". 2. Unscrew the 2 screws and remove the S-P.C.Board.
6. Return the projector to the normal position. 7. Remove the upper case.
6.3.
Removal of A-P.C.Board 6.5. Removal of J-P.C.Board (PTAE700E only)
1. Remove the upper case according to the section 6.2. "Removal of Upper Case". 2. Unscrew the 3 screws and remove the connector cover.
1. Remove the upper case according to the section 6.2.
11
|
