|
There are currently no product reviews.
 ;
Good quality service manual.The scheme is on A3 format and very readable.Thank you
;
Very good service-manual with clear electrical diagrams. Thanks you.
 ;
the manual is in quite good quality and it's in pdf. manual was send in less then 6h.
;
Absolutely top, I've got now all Service-Manuals I'll need to repair my Mackie-Mixer!
;
The service manuel is very helpful, we where able to restore the device to its working operation again.
PT-AE700U / PT-AE700E
6.2.
Removal of Upper Case
1. Remove the cap of the lens shift lever.
3. Unscrew the 2 screws and remove the A-P.C.Board block.
2. Unscrew the nut in the shift lever. Note: · Turn clockwise the nut to unscrew.
4. Unscrew the 7 screws and remove the connector plate.
3. Turn counterclockwise the shift lever and remove it. 4. Turn the projector upside down. 5. Unscrew the 7 screws.
6.4.
Removal of S-P.C.Board
1. Remove the upper case according to the section 6.2. "Removal of Upper Case". 2. Unscrew the 2 screws and remove the S-P.C.Board.
6. Return the projector to the normal position. 7. Remove the upper case.
6.3.
Removal of A-P.C.Board 6.5. Removal of J-P.C.Board (PTAE700E only)
1. Remove the upper case according to the section 6.2. "Removal of Upper Case". 2. Unscrew the 3 screws and remove the connector cover.
1. Remove the upper case according to the section 6.2.
11
|
