|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Il service manual molto accurato. Rapidi nella risposta
;
Quick site processing. A complete and very useful manual with all details. Thank you!
;
Quick service response. A useful and very rare service manual with all details. I recomend this service.
;
I ordered this manual sometime in the afternoon and I received it on my e-mail the same evening.
This is a fantastically good and properly scanned copy of the original manual. All pages are of the same scale and they overlap each other. It means that you can print the manual and easily make it as a convenient paper manual.
The content of the manual is fantastic. Alignment descriptions, PCB layouts and elementary diagrams are explicit and precise. I immediately found what I was looking for. Thanks to this manual and Owner-Manuals.com my amplifier is alive again. Many thanx indded!
;
The manual was well-scanned and easy to read. As an added bonus, the Operator's Manual was bundled with the Service Manual!
I'd definitely use owner-manuals.com again.
PT-AE900U / PT-AE900E
6.10. Removal of Analysis Block
1. Remove the lamp unit according to the section 6.9. "Removal of Lamp Unit". 2. Remove the A-P.C.Board block according to the steps 1 through 3 in the section 6.3. "Removal of A-P.C.Board". 3. Unscrew the 2 screws and remove the lamp unit terminal. 4. Unscrew the 1 screw and remove the thermofuse attachment. 5. Unscrew the 3 screws and remove the lamphouse.
9. Unscrew the 3 screws and remove the LCD duct.
6. Unscrew the 3 screws and remove the block of Analysis Block, LCD Block and Projection Lens Block.
6.11. Removal of LCD Block
1. Remove the A-P.C.Board block according to the steps 1 through 3 in the section 6.3. "Removal of A-P.C.Board". 2. Unscrew the 2 screws and remove the LCD block.
7. Unscrew the 2 screws and remove the LCD block. 8. Unscrew the 4 screws and remove the projection lens block (with shift mechanism).
6.12. Removal of Projection Lens
1. Remove the projection lens block according to the steps 1 through 8 in the section 6.10. "Removal of Analysis Block ". 2. Unscrew the 4 screws and separate the projection lens and the shift mechanism.
18
|
|
|
> |
|
