|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Manual is actually a pack of schematics, good quality pictures.
;
Great service. Manual delivered at a great price. Reliable delivery service. They have a great selection. A recommended service!
 ;
I used your service and I found myself well I need service manual teac v plate 770 and I was able to access and remove the belt that erno routes. thanks I recommend it to all
;
At first I thought there had been a mix up as I required the service manual for the cassette unit and the one supplied was for the CD unit. However when I scrolled further down I realised that both had been scanned together! This enabled me to dismantle and repair the cassette unit as intended and I also have a copy of the manual for both the CD and graphic equaliser units should I ever need them. Thanks very much for a great service.
;
Excelent service, the manual is complete, very cheap and fast
Alberto
PT-F200NTU / PT-F200NTE / PT-F200NTEA / PT-F200U / PT-F200E / PT-F200EA
3. Adjust the mirror adjusting lever A position to minimize color unevenness on the screen by shifting the lever in arrow directions. 4. Tighten the 1 screw.
8.5.3.3.
R Reflector Adjustment
1. Turn on the power and display 100 % white pattern on the screen. 2. Loosen the 1 screw fixing the mirror adjusting lever B just until the lever can be shifted. 3. Adjust the mirror adjusting lever B position to minimize color unevenness on the screen by shifting the lever in arrow directions. 4. Tighten the 1 screw.
8.5.3.4.
B Reflector Adjustment
1. Turn on the power and display 100 % white pattern on the screen. 2. Loosen the 1 screw fixing the mirror adjusting lever C just until the lever can be shifted. 3. Adjust the mirror adjusting lever C position to minimize color unevenness on the screen by shifting the lever in arrow directions. 4. Tighten the 1 screw.
8.6.
8.6.1.
Software for Adjustment
Outline
· This projector needs computer-aided adjustments. · After the software adjustments, this projector must be turned off and on again to memorize the settings. · Connect the cable between the projector and a PC as shown below. · Updating the software will change the version number.
8.6.2.
Note:
Operating Procedure
1. Run software program by the keyboard entry. · Use the software program as below. Adjustment Tool [PT-F200, PX8x0 Series] 2. The first menu is Port and Model selection menu. 3. Adjust the projector by selecting the necessary item from the menu in each stage.
8.6.3.
Port and Model Selection Menu
Select the applying item with the list box and click "Data" or "Adjustment".
8.6.3.1.
Port:
Explanation of Buttons
Port name of PC which connects with the projector
27
|
|
|
> |
|
