|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
the manual was very helpful thank you very much no one else was able to help me thanx
;
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
;
Very happy to find this from owners-manual.com and the enclosed spec sheet as well.
Not longer available from Sony.
;
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
;
Perfect. Very good service and very good scanning quality. All sheets are very legible. Thank's
NOTE: B sRGB is only enabled when RGB signals are being input (when �LAMP POWER� is set to �STANDARD�, �AI� is set to �OFF�, and �DAYLIGHT VIEW� is set to �OFF�).
AI
DAYLIGHT VIEW
ON The lamp is controlled according to the input signals to project images with the best quality. OFF �AI� is disabled. NOTE: B �AI� is disabled when �LAMP POWER� is set to �ECOMODE�. (Refer to page 50.)
This adjusts the vividness of the projected images when the projector is used under bright lighting. AUTO The vividness of the projected images will be adjusted according to the lighting condition of the room. OFF �DAYLIGHT VIEW� is disabled. NOTE: B �AUTO� may not function correctly if any objects are placed on the projector. B �AUTO� will be disabled when �INSTALLATION� in the �OPTION� menu is set to �REAR/DESK� or �REAR/CEILING�.
DETAILED SETUP
You can adjust the picture quality of the projected images in detail. Press the ENTER button to display the �DETAILED SETUP� menu.
WHITE BALANCE RED/GREEN/BLUE
(RGB only)
This is used to adjust the white areas of the picture if they appear colourised. To make the selected colour lighter: I button To make the selected colour stronger: H button
42-ENGLISH
|
|
|
> |
|
