A comprehensive Operating and Service Manual. All schematics are complete and easy to read. The PCB drawings and complete parts list are very helpful. I would definitely recommend this manual.
Genuine Toshiba owner's manual. Couldn't really ask for more. And written in understandable English in contrast to a few recent experiences I have had with manuals for other equipment other than Toshiba but made in China and written in "Chinglish"!
Text excerpt from page 42 (click to view)
NOTE: B sRGB is only enabled when RGB signals are being input (when �LAMP POWER� is set to �STANDARD�, �AI� is set to �OFF�, and �DAYLIGHT VIEW� is set to �OFF�).
AI
DAYLIGHT VIEW
ON The lamp is controlled according to the input signals to project images with the best quality. OFF �AI� is disabled. NOTE: B �AI� is disabled when �LAMP POWER� is set to �ECOMODE�. (Refer to page 50.)
This adjusts the vividness of the projected images when the projector is used under bright lighting. AUTO The vividness of the projected images will be adjusted according to the lighting condition of the room. OFF �DAYLIGHT VIEW� is disabled. NOTE: B �AUTO� may not function correctly if any objects are placed on the projector. B �AUTO� will be disabled when �INSTALLATION� in the �OPTION� menu is set to �REAR/DESK� or �REAR/CEILING�.
DETAILED SETUP
You can adjust the picture quality of the projected images in detail. Press the ENTER button to display the �DETAILED SETUP� menu.
WHITE BALANCE RED/GREEN/BLUE
(RGB only)
This is used to adjust the white areas of the picture if they appear colourised. To make the selected colour lighter: I button To make the selected colour stronger: H button
