|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Absolutely perfect! I've been trying to understand how to use all or at least some of the features of the receiver and especially the remote.
;
Copy of genuine owners/operators manual, very useful
;
The manual was a perfect match and was exactly what I was looking for. I'm very satisfied with my purchase.
;
Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
;
I wished detailed information of the JBL S310 and here I found it! Very happy with the service from this site!
Recording Mode
Recording Yourself
By opening the LCD Monitor and rotating it forward (to the lens side), you can let the subject in front of the Camcorder monitor the shot while recording is in progress.
Quick Start
By pressing the [QUICK START] Button 40 , the Camcorder will be ready for recording in approximately 1.3 seconds after it is turned on.
1
� The Quick Start Recording Lamp 40 lights up.
Press the [QUICK START] Button 40 .
40
� When the LCD Monitor is opened, the Viewfinder is disabled automatically. However, when the LCD Monitor is rotated forward, the image is also shown in the Viewfinder. � If you prefer to have the image on the LCD Monitor to look like an image in a mirror, set [SELF REC] on the [LCD/EVF] Sub-Menu to [MIRROR]. Images are recorded normally and no left and right reversal occurs.
2
Set the [OFF/ON] Switch 42 to [OFF].
� The Quick Start Recording Lamp remains lit.
42
3
Recording with the Built-in LED Video Light
To brighten the natural colors in a scene. Gain Up mode works with the Built-in Video Light to enhance the light�s brightness.
� The Camcorder will be ready for recording in approximately 1.3 seconds.
Set the [OFF/ON] Switch 42 to [ON].
To Cancel the Quick Start
Keep the [QUICK START] Button pressed for approximately 2 seconds and make sure the Quick Start Recording Lamp is not lit. � For other notes concerning this item, see page 56.
1
Press the [LIGHT] Button 11 . 1
Self-timer Recording
When you set the self-timer, the recording starts automatically after 10 seconds on the Card.
11
1
� The Built-in LED Video Light lights and the Gain Up mode is set to on. � Gain Up mode will be brighter than when only the Video Light is on, however, ghost images will appear.
Set [TAPE RECORDING MENU] or [CARD RECORDING MENU] >> [CAMERA] >> [SELF TIMER] >> [ON].
19 13 14 15 16 17
2 3
1
Press the [LIGHT] Button. 2
� Gain Up mode is set to off. � To eliminate ghost images, use this mode. � The Video Light turns off. � Pressing the [LIGHT] Button again returns to 1.
2 3
Press the [LIGHT] Button. 3
2
� The [
Press the [PHOTO SHOT] Button 35 .
35
] Indication appears.
� For other notes concerning this item, see page 55.
� The [ ] Indication flashes and the recording starts after 10 seconds. � You can also use the RapidFire Consecutive Photoshot. (p. 23) � For other notes concerning this item, see page 56.
24
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
|
|
|
> |
|
