|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
A comprehensive Operating and Service Manual. All schematics are complete and easy to read. The PCB drawings and complete parts list are very helpful. I would definitely recommend this manual.
;
SCANNING OF HIGH QUALITY
VERY, VERY HIGH VELOCITY DOWNLOAD
VERY GOOD PRICE,
TRUE SATISFIED, THANKS
;
Genuine Toshiba owner's manual. Couldn't really ask for more. And written in understandable English in contrast to a few recent experiences I have had with manuals for other equipment other than Toshiba but made in China and written in "Chinglish"!
;
I purchased a vintage Sony mixer off eBay and within the hour was able to locate and purchase the manual for it.I mean really,where else can you find a manual for a product made in 1983!? It was easy to find and purchase/download the manual I needed.I will use this site again for other equipment I have! Great site!
;
manual de usuario perfecto y completo de buena calidad de impresion y muy detallado ideal !
Cleaning the grease filters
Clean the filter every month or every other month according to how much the hood is used. The cleaner the filters, the better it collects grease. Remove the filter by (see picture): 1. Grab hold of the handle and push the filter backwards. 2. Pulling the filter down at the front and removing it forwards. The filter is made of aluminium wires on which the grease collects. Clean the filter in hot water using a detergent, or in a dishwasher. Let the filter dry before putting it back. Note that a dishwasher may discolour the filter.
Before doing any maintenance work on the hood, disconnect it from the main supply by disconnecting the plug from the wall socket or unscrewing the fuse.
Cleaning the motor cover
It is also possible to clean the motor cover (see picture): 1. Remove the grease filter. 2. Remove the inlet ring (A) by turning it anticlockwise. 3. Remove the fan wheel by unscrewing the centre nut (B) on the fan wheel. Use gloves when removing the fan wheel. Clean all the plastic and metal parts with warm water and washing dergent. Replace in reverse order.
A
B
Changing the light
Turn off the power before changing the light. 1. Remove the lampglass by pushing the two snaps forwards (see picture). 2. Replace the damaged part with one of equal rating. To remove the light without damaging it, place a finger on the end of the light and pull gently.
1 2
36
|
|
|
> |
|
