SHARP R35ST
Owner's Manual

R-35ST English

24/02/2005

16:30

Page 8

STOP KEY
Use of the STOP key: 1. Erasing a mistake during programming. 2. Stopping the oven temporaily during cooking. 3. Cancelling a programme during cooking by pressing the STOP key twice.

SETTING THE CLOCK
There are two setting modes: 12 hour clock and 24 hour clock. 1. To set the 12 hour clock, press the clock key once appear in the display. 2. To set the 24 hour clock, press the clock key twice appear in the display. To set the clock, follow the example below. Example: To set the 24 hour clock to 23:35 1. Choose the 24-hour clock by pressing the CLOCK key twice. 2. Set the hours: Press the 10 MIN key twice. Press the 1 MIN key three times. 3. Change from hours to minutes by pressing the CLOCK key once. will x1 will x2

x2 x2 4. Set the minutes: Press the 10 MIN key three times. Press the 1 MIN key five times. x3

x1

5. Start the clock by pressing the CLOCK key once.

Check the display

x3

x5

x1

NOTE: 1. Press the STOP key if you make a mistake during programming. 2. If the electrical power supply to your microwave oven is interrupted, the display will intermittently show after the power is reinstated. If this

occurs during cooking, the programme will be erased. The time of day will also be erased. 3. When you want to reset the time of day, follow the above example again.

8