SHARP R82FBSTM
Owner's Manual

R-82FBSTM Op Man

18/08/2004

09:01

Page 10

SETTING THE CLOCK
Your oven has a 12 hour and a 24 hour clock. � To select the 12 hour clock, press the CLOCK SET button once. �12H� will appear on the display. x1 2. Enter the hours by turning the TIME/WEIGHT knob. 1. Select the clock type required.

� To select the 24 hour clock, press the CLOCK SET button twice. �24H� will appear on the display. x2

To set the time of day follow the instructions opposite. 3. Press the CLOCK SET button once. NOTES: � Press the STOP/CLEAR button if you make a mistake during programming. � To check the time of day during a cooking process, press the CLOCK SET button and the time of day will remain on the display as long as you keep your finger on the button. This does not affect the cooking process. � If the clock is set, when cooking is complete, the display will show the correct time of day. If the clock has not been set, the display will only show �.0� when cooking is complete. � If the electrical power supply to your microwave oven is interrupted, the display will intermittently show �.0� after the power is reinstated. If this occurs during cooking, the programme will be erased. The time of day will also be erased. � When you want to reset the time of day, follow the opposite example again. x1

4. Enter the minutes by turning the TIME/WEIGHT knob.

5. To start the clock, press the CLOCK SET button once.

x1

10