My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
This manual is very helpfull to use the Power Supply. All technical information has been available.
For service use the circuit diagrams are very good.
Thanks .
Very comprehensive document which is a must-have for any Satellit 2100 owner whose set up is somewhat intricate. Due to the bad quality of the pictures that are rather dark and a bit blurred I gave 4-star feedback.
The manual was missing 2 pages but when I presented the problem to the company they made every attempt to get the 2 pages to me, when they couldn't they refunded my money. A very pleasing and easy transaction. The manual they provided was the original, it was concise and to the point. I plan to do business with this company again when should the need arise.
The owners manual is very good. all my how to questions were answered in detail.
Text excerpt from page 17 (click to view)
To replace: 1. Fit the door hinges into corner slots on the oven
frame.
2. Push the hinges straight in while lifting the door
slightly.
3. When hinges snap into place, open the door and rotate the Broil Stop clips to uncover the door hinge slots. Close the door.
Model
RB220PXY:
To remove: 1. Open the door to the first stop position. 2. Hold the door at both sides and lift it at the same angle it is in. 3. To replace, fft the bottom corners of the door over the ends of the hinges. Push
the door down evenly. The door will close only when it is on the hinges correctly.
Removing
the oven window
(model RB1005XY) If your oven has an oven window instead of the black glass door, the outer glass and frame can be removed for cleaning. Do not take apart a black glass door.
To remove
the outer
window:
1. Turn off all controls. With the door closed, remove the screws from the top
of the outer window frame.
2. Slightly tip the window and frame out from
the top.
3. With both hands, lift up on both sides of the
frame.
To replace
the outer
window:
1. Fit the bottom tabs of the frame into the
bottom of the window opening.
2. Push the top of the frame into place while
pushing down.