|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Manual is actually a pack of schematics, good quality pictures.
;
Great service. Manual delivered at a great price. Reliable delivery service. They have a great selection. A recommended service!
 ;
I used your service and I found myself well I need service manual teac v plate 770 and I was able to access and remove the belt that erno routes. thanks I recommend it to all
;
At first I thought there had been a mix up as I required the service manual for the cassette unit and the one supplied was for the CD unit. However when I scrolled further down I realised that both had been scanned together! This enabled me to dismantle and repair the cassette unit as intended and I also have a copy of the manual for both the CD and graphic equaliser units should I ever need them. Thanks very much for a great service.
;
Excelent service, the manual is complete, very cheap and fast
Alberto
Alignment and Adjustments
1-2 Cassette Deck
1-2-1. Recording BIAS adjustment
1) Connect frequency counter to KC433 (See Fig.1-6)and press the Record button. 2) Adjust KT431 (BIAS OSC COIL) until frequency counter reads 50KHz.
1-2-2. Tape AZIMUTH adjustment
1) Connect the equipments as per Fig.1-8 to adjust the tape azimuth with test tape (recorded at 6.3KHz : MTT-113N) 2) Play the test tape after inserting in DECK. 3) Adjust the azimuth ajustment screw of left side of record/play head for maximum output and for the same channel phase. (see Fig.1-7)
1-2-3. Tape speed adjustment
1) Connect the equipments as shown in Fig.1-8 adjust the tape speed with test tape (recorded at 3KHz : MTT-111N)
PRE/REC PART
KC433
50KHz FREQUENCY COUNTER
Fig.1-6 Recording bias adjustment
Adjustment
R/P head
Adjustment screw
Fig.1-7 Azimuth speed adjustment
VTVM
OSCILLOSCOPE UNIT UNDER TEST 3000Hz FREQUENCY COUNTER
Fig.1-8
Samsung Electronics
1-3
|
|
|
> |
|
