The manual is complete with excellent quality! One suggestion, show number of pages and weather it is multi-lingual. The AD 600 Manuel is about 76 pages and over half is non English. This results in a larger print job than usually needed. Having this information, one could select the desired pages for printing.
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
Very happy to find this from owners-manual.com and the enclosed spec sheet as well.
Not longer available from Sony.
Text excerpt from page 6 (click to view)
To Control a Component that Couldn�t be Successfully Programmed
1. Place the LCD Remote and the remote you want to learn the commands from head-tohead, about 4 inches apart:
To Extend the Functions of a Component that was Successfully Programmed
By using the LCD remote�s �Extend 1 - 5� functions you can program up to 5 extended functions for each component you have set the remote up to control. 1. Place the LCD Remote and the remote you want to learn the commands from head-tohead, about 4 inches apart:
2. Press the MUSIC, MOVIE or TV button to select the component whose commands you want to learn. 3. Press the remote�s LEARN button. 2. Press the MUSIC, MOVIE or TV button to select the component you want to add functions to. 3. Press the remote�s LEARN button.
4. Press the button on the LCD remote into which you want to program the new function. The display will show:
The display will show: 5. Press and hold the button with the function that you want the LCD remote to learn. Do not move either remote until the LCD remote�s display changes from �Waiting� to �Complete�. � To reset a button to its original factory-programmed function, press the �Clr� button in step 3 of the above procedure. 6. Repeat steps 3 -4 to finish programming the remote to control the component. 7. Repeat steps 1 - 4 to program the remote to control a different component. � When you are finished, press the �Exit� button. 4. Use the and buttons to select �Extend1�, �Extend2�, �Extend3�, �Extend4�, or �Extend5�; press �Enter�. The display will show: