|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Genuine Toshiba owner's manual. Couldn't really ask for more. And written in understandable English in contrast to a few recent experiences I have had with manuals for other equipment other than Toshiba but made in China and written in "Chinglish"!
;
I purchased a vintage Sony mixer off eBay and within the hour was able to locate and purchase the manual for it.I mean really,where else can you find a manual for a product made in 1983!? It was easy to find and purchase/download the manual I needed.I will use this site again for other equipment I have! Great site!
;
manual de usuario perfecto y completo de buena calidad de impresion y muy detallado ideal !
 ;
It`s full copy of a service manual from url http://www.philips.owner-manuals.com/PM3216-service-manual-PHILIPS.html
;
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Getting Ready
4
Use the Installation Tool supplied with the Wave Expansion Board to turn the holders in the LOCK direction, so the board will be fastened in place.
fig.00-05e
LOCK
Installation tool
5
Use the screws that you removed in step 2 to fasten the cover back in place.
Checking the Installed Wave Expansion Boards
After installation of the Wave Expansion Boards has been completed, check to confirm that the installed boards are being recognized correctly.
fig.00-06p
2
1 2
Turn on the power, as described in �Turning On the Power� (p. 23).
�Selecting Wave Expansion Board Tones� (p. 35).
The name of the installed wave expansion board is displayed for as long as EXPANSION [A] or [B] is held down.
The number of tones and Rhythm Sets contained in the expansion board is displayed. The example here depicts what you would see if the SRX-02 �Concert Piano� Wave Expansion Board were installed in the SRX A slot.
fig.00-07g
If �------� appears next to the name of the slot in which the board was installed, it may be that the wave expansion board is not being recognized properly. Use the procedure in �Turning Off the Power� (p. 24) to turn the power off, then reinstall the wave expansion board correctly.
By releasing the button, you go back to the previous screen.
17
|
|
|
> |
|
