SHERWOOD RD-8500
Owner's Manual

� When selecting the type of front speaker, �FRONT L 3.0(m)�

� You can select one of 2 different speaker settings. L S
(L: Large, S: Small)

� When selecting the distance of front speaker, �FRONT L 3.0(m)� � When selecting the type of center speaker, �CNTR L 3.0(m)�

� You can adjust the distance within the range of 0 ~ 9 meters in 0.3 meter intervals. 0.0 (m) ~ 9.0 (m) � You can select one of 3 different speaker settings. LS N
(L: Large, S: Small, N: None)

� When selecting the distance of center speaker, �CNTR L 3.0(m)� � When selecting the type of surround speaker, �SURR L 1.5(m)� � When selecting the distance of surround speaker, �SURR L 1.5(m)� � When selecting the type of surround back speaker, �SURR-B L 1.5(m)� � When selecting the distance of surround speaker, �SURR-B L 1.5(m)�

� You can adjust the distance within the range of 0 ~ 9 meters in 0.3 meter intervals. 0.0 (m) ~ 9.0 (m) � You can select one of 3 different speaker settings. LS N � You can adjust the distance within the range of 0 ~ 9 meters in 0.3 meter intervals. 0.0 (m) ~ 9.0 (m) � You can select one of 3 different speaker settings. LS N � You can adjust the distance within the range of 0 ~ 9 meters in 0.3 meter intervals. 0.0 (m) ~ 9.0 (m) Y(es) N(one) � When the front speaker is set to �S�, the subwoofer is automatically set to �Y�. NARROW : Relatively long distance for the main listening position to front speakers. WIDE : Relatively short distance.

� When selecting the subwoofer, �SUB-W Y�

� When selecting the Dolby Virtual delay time, �NARROW� � This mode can work only in the Dolby Virtual mode. In the other surround modes, this setting is just displayed. � When selecting the crossover frequency, �FC 80Hz�
When the speaker type is �N�, the distance displays �-.-�.

(unit : Hz)

3

Memorize the adjusted speaker settings.
T/V

T/V

MEMO/ENTER

or

ENTER

� The adjusted speaker settings are stored in the memory.

25

ENGLISH

80

100

120