|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Manual was reasonably easy to follow. I am not an engineer or know much about electronics but with the manuals help I was able to figure out the problem, identify the part required for the repair. Replacement part cost around $30. Whilst replacing the part I was telling myself, "this aint gonna work cos it seems far too easy". Took about 15 minutes to do and my plasma TV works a treat. Would never have been able to do this without the service manual.
 ;
It is OK, this manual help me to repair my dynacord
 ;
Good manual. Even it is an old printed manual, it is well scanned and complete, with all drawings, schematics and parts list. Very good return for the cost.
 ;
I'm very satisfied with my purchase. It resolved my problem. Owner-manuals.com is a very very good place.
Thank you!
 ;
Veramente completo, dettagliato e perfetto nella visione. Perfect, thanks!
S-Video output error
Component output error
16pin and 20pin in CN2 of jack PCB or CN2 of main PCB has normal level? Yes
No
Check main PCB.
4, 8 and 12pin in CN2 of jack PCB or CN2 of main PCB has normal level?
No
Check main PCB
Yes
Analong signals are inputted nirmally VIC1 (Jack PCB) Yes
No
Check the connection between 6pin and 7 pin in CN01 of main PCB and VIC1
Analog signals are inputted normally VIC1
No
Check the connection between6 and 7pin in CN01 of main PCB and VIC1
Yes
Power is normal at VIC1-1,24, 34?
No
Check the connection between VIC1-1 and power
Power is normal at VIC1-1,24, 34?
No
Check the connection between VIC1-1 and power
Yes
Yes
Pin13 in VIC1 is in high state?
No
Check the connection betweenVIC1-13 and VCR Micom. check VIC1 peripheral circuit
Video signals of about 1V appears at output jack? Yes
No
7-16
Check the connection between VIC1 and output jack Check VIC1-21, 23, 25, VE5, VE6 VE7, VR32, VR33, VR34
Yes
Check the RCA cable
Video signals of about 1V appears at output jack? Yes
No Check the connection between VIC1 and output jack. Check VIC1-28, 31, VR30, VR31
Check the RCA cable
|
|
 |
> |
|