I purchased a vintage Sony mixer off eBay and within the hour was able to locate and purchase the manual for it.I mean really,where else can you find a manual for a product made in 1983!? It was easy to find and purchase/download the manual I needed.I will use this site again for other equipment I have! Great site!
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Well Well Well!!!! Good manual perfect for my hobby!!! As Before you have done a very well done work!!!! Thank you
Text excerpt from page 42 (click to view)
Connecting�Continued
Connecting the Power Cord
Notes: � Before connecting the power cord, complete all of the necessary audio and video connections. � Do not use a power cord other than the one supplied with the RDV-1.1, which is designed exclusively for use with the RDV-1.1 and should not be used with any other component. � Never disconnect the power cord from the RDV-1.1 while the other end is still plugged into a wall outlet. Doing so may cause an electric shock. Always disconnect the power cord from the wall outlet �rst. � The RDV-1.1 is shipped with the Power switch in the On position ( ). When the power cord is connected for the very �rst time, the RDV-1.1 will go on Standby and the Standby indicator will light up. � To completely shutdown the RDV-1.1, set the Power switch to the Off position ( ).
DVD CHANGER
MODEL NO.
DPC-7.4
AC INLET
1 2
Plug the supplied power cord into the RDV-1.1�s AC INLET. Plug the other end of the power cord into a suitable AC wall outlet. The Standby indicator lights up. The Standby indicator comes on only if the Power switch is in the On position ( ).