|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Thanks for offering this item at such a good price. Proved handy in identifying the part I was looking for my set.
Thanks again.
;
This is the original manufacturers service manual, with detailed info on the circit boards, explosion drawings of all parts in assembly order, and tuning instructions. The only thing missing is the information on the dimensions of the various drive belts. mail me if you need them. gcrossman_at_aol.com
;
Ordered service manuel for a hard to find plasma tv - your company made it easy to find and purchase - I will use you again
Thanks for your help
 ;
This is a high quality manual with clear schematic and components layout diagrams ; with service procedure included.
;
This service manual for the Kenwood KT-990D was reproduced really well ,is very legible and manual is complete.Combined with the low price paid,in the future,I will be checking Owner-Manuals.com any time I need a manual.
FLOW CHART NO.6 HDD+12V is not outputted. Is 14V voltage supplied to the collector of Q2203? Yes Is the "H" pulse inputted to the base of Q1016? Yes Check Q2221,IC2204,D2225 and their periphery, and service it if defective. No Check D2204, D2205, D2212, C2204 and their periphery, and service it if defective. Check the line between the base of Q1016 and Pin (77) of IC1501,and service it if defective.
No
FLOW CHART NO.7 P-ON+10V is not outputted. (HDD+12V is outputted normally.) Is 11V voltage supplied to the base of Q1160? Yes Replace Q1160. No Check D1162 and their periphery, and service it if defective.
FLOW CHART NO.8 EV +10.5V is not outputted. Is HDD+12V outputted normally? Yes Replace Q1163. No See FLOW CHART No.6 <HDD+12V is not outputted.>
FLOW CHART NO.9 AL+9V is not outputted. Is 12V voltage supplied to Pin (3) of IC1002? Yes Replace IC1002. No Check D1170, D1171, D2205, D2212, C2204 and their periphery, and service it if defective.
FLOW CHART NO.10 AL+5V(1) is not outputted. Check D2206,D2207,D2213,C2205,C2216 and their periphery, and service it if defective.
FLOW CHART NO.11 AL+5V is not outputted. (AL+9V is outputted normally.) Is 7V voltage supplied to the collector of Q1508? Yes Is 5.6V voltage supplied to the base of Q1508? Yes Replace Q1508. No No Check D1172, D1173 and their periphery, and service it if defective. Check D1508 and their periphery, and service it if defective.
E2B10TR
1-9-2
|
|
|
> |
|
