I purchased the unit from a private party and the original owners manual was not available. Having the ability to download it was extremely helpful and clarified operating the equipment immensely. This is a complicated unit and without the manual I would not have been able to maximize it's potential. Thank you.
Being a user of older radios of many kinds, preferring them over more modern rigs, this manual was invaluable in the programming of my two. I now know for certain what the assorted buttons functions are, and am very grateful to have found this excellent site. Many thanks for your assistance, Tony.
5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
Text excerpt from page 6 (click to view)
Using your range
Using the Surface Units
Surface Unit Markers
The solid dot in the surface unit marker shows which surface unit is turned on by that knob.
Surface Unit Indicator lights
One of the surface unit indicator lights on the control panel will glow when a surface unit is on. them to a setting. They can be set anywhere between HI and OFF.
Control knobs before turning must be pushed in
Burn and Flre Hazard Be sure all control knobs are turned to OFF and all indicator lights are OFF when you are not cooking. Someone could be burned or a fire could start if a surface unlt is accidentally lefl ON. as a guide.
For best results, start cooking at the high settings; then turn the control knob down to continue cooking.
Use HI to start Use MED-HI Use MED Use MED-LO Use LO to
Until you get used to the settings,
use the following
foods cooking; to bring liquids to a boil.
to hold a rapid boil; to fry chicken or pancakes.
for gravy, puddings and icing; to cook large amounts of vegetables.
to keep food cooking after starting it on a higher setting.
keep food warm until ready to serve. Set the heat higher or lower within the LO band to keep food at the temperature you want.