|
There are currently no product reviews.
 ;
Product was very good. Received quickly and complete
 ;
Although printing quality is not the best, the manual was very helpful in order to reactivate this ancient but still good electronic musical instrument.
 ;
as a first-time user and buyer from this site, i found the overall service outstanding!! this product is a godsend as, without it, i would never have been able to find my way around and use my machine as intended. i will certainly use this site again as required. many many thanx!!
 ;
This manual is exactly what I needed. This site always has every manual I need, and it is also much less expensive then most other sites. This is the only manual site I will use.
 ;
Useful manual, good scan, worth the pay if you find the unit difficult to operate.
USING YOUR RANGE
BAKING/ROASTING (CONT.)
6. When baking, put your food in the oven after the
preheat conditioning time ends. During baking/roasting, the elements will turn on and off to keep the oven temperature at the setting. NOTE: The top element helps heat during baking/roasting, but does not turn red.
7. After cooking, turn off the oven.
PRESS
OFF
CANCEL
YOU SEE
Saving energy
� To avoid loss of heat, open the oven door as little
as possible. � Use a timer to keep track of cooking time. � Plan your meals for the most efficient use of the oven by cooking more than one food at a time, or baking while the oven is still hot after cooking a meal.
(time of day)
ADJUSTING THE OVEN TEMPERATURE CONTROL
Although your new oven is properly adjusted to provide accurate temperatures, it may cook faster or slower than your old oven. If you are not satisfied with the baking/roasting results, you can change the offset temperature by following the steps below. NOTE: DO NOT measure the oven temperature with a thermometer. Opening the oven door will lower the oven temperature and give you an incorrect reading. Also, the thermometer temperature reading will change as your oven cycles.
1. Press and hold BAKE for 5 seconds.
The display will show the current offset temperature, for example �0,� if you have not already adjusted the temperature.
PRESS
BAKE
YOU SEE
(factory setting of �0�)
16
|