I purchased the unit from a private party and the original owners manual was not available. Having the ability to download it was extremely helpful and clarified operating the equipment immensely. This is a complicated unit and without the manual I would not have been able to maximize it's potential. Thank you.
Being a user of older radios of many kinds, preferring them over more modern rigs, this manual was invaluable in the programming of my two. I now know for certain what the assorted buttons functions are, and am very grateful to have found this excellent site. Many thanks for your assistance, Tony.
5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
Text excerpt from page 24 (click to view)
Using and Replacing the Light Bulbs
The Cooktop light
The Top Light Switch is located below the control panel. Push the right side of the switch to turn the light ON. Push the left side of the switch to turn it OFF.
To replace the fluorescent
tube and starter:
2. With both hands, pull top of light
cover towards you and lift it out of bottom support trim.
Remove the 3 screws and metal trim that supports the top of the light cover. The glass is heavy.
Hold it securely.
3. Grasp the fluorescent tube at both ends. Roll bottom of the tube towards the front until both ends come out of the receptacles. Replace with a 20-watt cool-white fluorescent tube. If starter needs replacement, push in and turn to remove and replace.
4. With both hands, carefully
fit the glass light cover into the bottom metal support trim. Replace the top support trim and screws. Turn electric power back on at the main power supply.