|
There are currently no product reviews.
 ;
Great scan but please note that it is entirely in GERMAN.
 ;
High quality scan of the manual, very quick and easy download and very important, a truly honest price. thanks
;
Minden rendben, de két megjegyzés, az ábrák nehezen kivehetők és a fizetés után 24 órát kell várni a letöltésre.
;
Manual correct, and complete. Downloads cleanly. Format of manual was presumably difficult to PDF to A4, but works reasonably well.
;
This was a hard to find manual. When I did find it , some sites wanted way too much for the file.
Owner-manual .com had it for a really reasonable price. Not only that but it was sent very quickly and was a quality scanned document, unlike some others I purchased from a different site.
Good job guys!!
Larry
Using and Replacing the Light Bulbs
The Cooktop light
The Top Light Switch is located below the control panel. Push the right side of the switch to turn the light ON. Push the left side of the switch to turn it OFF.
To replace the fluorescent
tube and starter:
2. With both hands, pull top of light
cover towards you and lift it out of bottom support trim.
Remove the 3 screws and metal trim that supports the top of the light cover. The glass is heavy.
Hold it securely.
3. Grasp the fluorescent tube at both ends. Roll bottom of the tube towards the front until both ends come out of the receptacles. Replace with a 20-watt cool-white fluorescent tube. If starter needs replacement, push in and turn to remove and replace.
4. With both hands, carefully
fit the glass light cover into the bottom metal support trim. Replace the top support trim and screws. Turn electric power back on at the main power supply.
24
|
