|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
excellent quality, contains circuits and scan quality, 110 pages
;
It was easy done, and I got exactly what I was looking for.
;
The manuel was exactly what I needed and I received it promptly. Thanks
;
Thanks to Owner-Manuals.com! This manual was exactly what I needed. As Amana was purchased by Maytag and later by Whirlpool, there was no way to receive it from their websites. I was lucky to find this resource.
 ;
Great to be able to set channels again, on an old but stoll fine working TV
MAINTENANCE
Changing the Cutting Unit�s Belt
WARNING! Protect your hands with gloves when working with the blades. There is a risk of crush injuries when working with the belt. Changing the belt on the Combi unit On these cutting units with �collision-proof� blades, the blades are driven by one V-belt. Do as follows to replace the V-belt: 1. 2. Dismantle the cutting unit, see page 51. Loosen the unit frame (1) see page 53, the screw on the parallelism strut (2) and the two screws on the cover (3). Lift the protective cover from the belts.
3 1 3
8009-005
2
6016-113
3.
Loosen the spring (4) that tensions the V-belt and pull the belt off.
8009-376
4.
Attach the new belt. The belt tightening schedule is located on a decal on the inside of the protective cover.
5. 6. 7.
Check that the belt tensioning equipment is not jammed or binding and replace the spring. Replace the protective cover and attach the parallelism handle and unit frame. Attach the cutting unit to the machine, see �Attaching the Cutting Unit� on page 45.
English-59
|
|
|
> |
|
