|
There are currently no product reviews.
 ;
It was a complete manual as stated. Very good source for older product manuals. Thanks
;
Scan quality is very good. Price is very reasonable. If you're looking to purchase a copy of this manual, this is the one to get.
 ;
Perfect for my use.Could have better pictures,but otherwise perfect ;)
;
This is one of four manuals I have downloaded recently.
Purchase was very straight forward and the authorising email arrived in about 4 hours.
The quality of the scan is good. Print is clear and square to the page edges.
;
Exactly as advertized. High quality digital copy of the Nak 610 user manual. Easy download and access. Highly recommended.
Adjusting the Oven Temperature
Control
Does your oven seem hotter or colder than your old oven? The temperature of your old oven may have shifted gradually without your noticing the change. Your new oven is properly adjusted to provide accurate temperatures. But when comparing to your old oven, the new design may give you different results. If after using the oven for a period of time, you are not satisfied with the temperature settings, they can be adjusted by following these steps:
1.
Pull the Oven Temperature Control Knob straight off.
2. Loosen the lockina screw inside the control knob. Foote the position of the notches.
3.
To lower the�temperature, move a notch closer to LO.Each notch equals about 10°F(5°C).
4.
To raise the temp&ature, move a notch closer to HI. Each notch equals about 10°F(SOC]. Tighten the locking screw and replace the control knob.
16
|
